Product Description
Important Notice
The power supply could be Single-phase AC 220V (-10%~10%), 50Hz~60Hz.
It's forbidden to connect the 380V power supply to the power terminals of the drive directly.
Provide an external emergency stop circuit to ensure that operation can be stopped and power switched off immediately.
For equipment in which the moving part of the machine may collide against the load side, install a limit switch or stopper to the end of the moving part. The machine may be damaged due to a collision.
Do not scratch the coated surface with hard objects nor clean the coated surface with an organic solvent. Doing so may scuff the surface.
Do not disassemble, repair, or modify the product. Otherwise, an electric shock, fire, injury, etc. may occur. Disassembled, repaired, and/or modified products are not covered under warranty.
Use the servo amplifier (converter unit) with the specified servo motor.
Correctly wire options and peripheral equipment, etc. in the correct combination. Otherwise, an electric shock, fire, injury, etc. may occur.
The electromagnetic brake on the servo motor is designed to hold the motor shaft and should not be used for ordinary braking.
For such reasons as incorrect wiring, service life, and mechanical structure (e.g. where a ball screw and the servo motor are coupled via a timing belt), the electromagnetic brake may not hold the motor shaft.
To ensure safety, install a stopper on the machine side. If the dynamic brake is activated at power-off, alarm occurrence, etc., do not rotate the servo motor by an external force. Otherwise, it may cause a fire
| Type |
SP060-BO-00230-CL. |
SP60-BD-0043-OL |
SP060-BD-00530-01 |
| Rated Power(KW) |
0.2 |
0.4 |
0.5 |
| Polar |
5 |
5 |
5 |
| Voltage (V) |
24/48/220 |
24/48/220 |
24/48/220 |
| RPM |
3000 |
3000 |
3000 |
| Max. Speed |
5000 |
5000 |
5000 |
| NM |
0.654 |
1.27 |
1.59 |
| Max. Torque(NM) |
1.92 |
3.81 |
3.98 |
| Current(A) |
1.5 |
2.3 |
2.8 |
| ROTOT Inertia (X10-4kg.m2) |
0.2 |
0.31 |
0.31 |
| ROTOT Inertia(X10-4kg .m2) BRAKE |
0.23 |
0.34 |
0.34 |
| Torque Constant(N.m/A) |
0.43 |
0.55 |
0.57 |
| Back EMF(V/krpm) |
32. 1 |
35.7 |
35.7 |
| Resistance(Ω) |
7.92 |
4.08 |
4.08 |
| Inductance(mH) |
20. 1 |
13.5 |
13.5 |
| Electric Constant(ms) |
2.5 |
3.3 |
3.3 |
| Insulation Class |
F |
F |
F |
| IP Level |
IP54/IP65(0il seal) |
IP54/ IP65 (Oil seal) |
IP54/IP65(Oil seal) |
Audited Supplier 
){kind=link}